XRT Manual Series

Part Number: OT/203-S
  • Features
  • Specifications
  • What’s included
  • Download PDF
  • Enquiry
  • Email this Page

The XRT Manual Series operating table have been designed with the input of professionals from the surgical field. The range excels in all the areas that have been emphasised by these professionals as the critical factors that determine the quality of an operating table.

The four section top provides the surgeon with a multitude of positioning options to cover a wide range of surgical procedures.

The XRT Manual Series also feature the option of extended height adjustment. With this option, the operating tables have one of the lowest and highest height range of any operating table. This allows the patient to be raised or lowered to that perfect height providing the surgeon with more stability and comfort.

The built in X-Ray cassette tunnel runs along the full length of the operating table without any obstruction to radiolucency. X-ray image sharpness has been greatly increased by reducing the object image receptor distance to 9.5mm (.37″”) via this cassette tunnel.

The XRT 3000 & 3500 feature the most extensive uninterrupted radiolucent facility in any operating table. This is achieved through the table’s ability to have its head section connected to the end of its leg section without compromising its stability. X-Rays and Image Intensifiers can be used from the beginning of the lower trunk section, through the leg section and head section as if all three sections were one continuous unit. The total length of the uninterrupted radiolucent area is 54″ (1370mm).

KEY FEATURES

  • X-Ray Cassette Tunnel
    A cassette tray holding standard X-ray cassettes can be passed along a tunnel built into the table from end to end without any obstruction to radiolucency.
  • Perfect Radiolucency & Improved Accessibility
    The XRT top is 100% radiolucent & resists scratching & staining. The clever design allows for unobstructed & easy access by Image Intensifies.
  • Extended Height Range Option
    The XRT series has the lowest and highest range of any operating table known to us (26″ to 44″) allowing for the perfect height for surgeon comfort & advanced surgeries.
  • Earthed, nonconductive
    The table has an anti-conductive facility to prevent accidental static electric discharge in the operating theatre.
  • Single Handle for all Movements
    All table top positions are controlled from a single conveniently located handle. This eliminates the need to move around the table to access other handles.
  • Low Maintenance Cost & long Service Life
    Very little maintenance is needed to care for the operating table. Coupled with its extremely long service life, the XRT series offers unbeatable value for money.
  • Interchangeable Head & Leg Sections
    Reverse the side of the table the controls are on for added convenience & surgical flexibility.
  • Extensive Positioning Capabilities
    The XRT’s 4 section top enables it to adapt to a wide range of positions for different surgical procedures.

XRT 2000
OT/202

XRT 3000
OT/203

XRT 3500
OT/203-S

Minimum height

750mm 29.5″

750mm 29.5″

660mm 26″

Maximum height

1092mm 43″

1092mm 43″

1118mm 44″

Width of top over side rails

521mm 20.5″

521mm 20.5″

521mm 20.5″

Length of top

1968mm 77.5″

1968mm 77.5″

1968mm 77.5″

Trendelenberg

40°

40°

40°

Reverse Trendelenberg

27°

27°

27°

Extension

220°

220°

220°

Flexion

90°

90°

90°

Lateral Tilt

20° Each Way

20° Each Way

20° Each Way

Chair Position

90°

90°

90°

Head End Elevation

37.5°

37.5°

44°

Head End Drop

27.5°

27.5°

31°

Leg End Elevation

33°

33°

Leg End Drop

90°

93°

93°

WHATS INCLUDED

Mattress Set
User Manual

WHATS OPTIONAL

Accessory Rail size
– please specify Denyer or European or U.S. or U.K.

  • This field is for validation purposes and should be left unchanged.

RELATED PRODUCTS