PART NUMBER: OT/6000
The XRT6000 slide-top continues the Denyer tradition of high quality, feature-rich, reliable, well priced surgical tables which incorporate the experience and feed-back gained in over 125 years of working with Surgeons, Anaesthetists, Nurses and other medical specialists.
The Denyer XRT 6000 is Australian conceived, designed, assembled and supported.
TheDenyer XRT6000 is a general purpose surgical table, suitable for all disciplines of surgery, including Orthopaedic, Bariatric, Gynaecological, Cardio-thoracic, Neurosurgery, Ophthalmic, Urological, Plastic and General.
The table is primarily controlled by a lightweight, easily read hand piece which controls height, Trendelenberg, lateral tilt, back up/down, leg up/down, top slide, floor stops, and two user-programmable pre-sets. An optional foot control is available for control of height, Trendelenberg and lateral tilt. A return-to-level button brings all sections back to level in customer defined increments. The head section is manually articulated.
To prevent section conflicts which could be possible with combinations of extreme movements of top sections, the Denyer XRT6000 is fitted with sensors that predict imminent collisions (e.g. leg-to-floor with extreme slide and Trend) and prevents the collision occurring.
All main surfaces are high quality stainless steel with a gloss phenolic resin top surface which makes for easy and efficient cleaning.
The powered movements are actuated by an hydraulic pump driven by a rechargeable battery. The battery is the latest technology Lithium Ion which has enough capacity for several days of operations, but should the battery ever go flat the table will operate directly from mains power. There is also a foot operated pump pedal, a second fully interchangeable corded hand piece permanently attached to the table and bypass electronics, which provides a comprehensive manual override system.
Ease of use and practicality were driving issues in design so the hand control has simple, very legible buttons and all controls have large articulation ranges.
The electronics of the table allow for remote diagnostics and control. The speed and other characteristics of all articulations can be modified via a simple PC interface and also provide the capacity for integration into the latest digital O.R. systems etc
WEIGHT CAPACITY |
||
• Full lift and articulate of patients up to 500kg when centred over column. |
||
• Full lift and articulate in all surgical positions (incl. lithotomy) of patients up to 300kg. |
||
TABLE TOP DIMENSIONS |
||
Table top Slide |
420mm |
|
Number of sections |
4 |
|
Width of top |
522mm |
568mm incl. rails |
Length of top |
2040mm |
|
TABLE TOP ARTICULATION |
||
Table top Height: |
590mm (min) |
1125mm (max) |
Trendelenberg |
30° |
30° reverse |
Flex / reflex |
90° |
220° |
Lateral tilt |
20° left |
20° right |
Back up / down |
90° |
40° |
Leg up / down |
30° |
105° |
Head up / down |
45° |
90° infinite adjust |
ELECTRICAL |
||
• Batteries: 24 Volt lithium ion, 20AH |
||
• Mains power: 220-240 Volt, 50/60 cycle, 6 Amp max. charging current |
||
• RS232 Interface: 9 pin D connector |
||
• Wired hand control, bayonet Lemo connector |
||
• Wired override control, bayonet Lemo connector |
||
• Wired foot control, bayonet Lemo connector |
||
• Infra-red, cordless hand control & 2 x receivers on base give 360° coverage |
||
OVERRIDE |
||
• In case of component failure, fitted with spare hand pendant (interchangeable with normal hand pendant), foot pump and completely separate main circuit board, giving a fully redundant system. |
||
• Can run directly from mains power in event of battery problems. |
OTSP/M601 Hand Control for XRT6000 1 x Handset |
OTSP/M262 Override hand control 1 x Handset |
MAT/2048 – Visco (blue) Visco Tri-layer Matteress 1 x 3 piece setORMAT/2040 – Moulded (Black) Moulded slow recovery foam 1 x 3 piece set |
User manual
If you have any questions about XRT6000 – Height Advantage Table or any other Denyers product please